A study of sulfur homogeneous nucleation from supersaturated vapor. Determination of surface tension of sulfur nanoparticles

Homogeneous nucleation in sulfur vapor is studied in a laminar-flow chamber. Concentration and size distribution of resulting aerosol particles are measured with a diffusion spectrometer of aerosols and a PK.GTA-0,3-002 photoelectric particle counter. The crystal structure of the formed particles is studied by X-ray diffraction analysis. The rate of sulfur evaporation from a boat and the profile of a deposit on the chamber wall along the axial coordinate are determined by gravimetry. Axial and radial temperature profiles are measured using a chromel-alumel thermocouple. The vapor concentration distribution in the chamber is found and the supersaturation is calculated from the solution of the mass-transfer problem. An experimental low-laborious method is developed for the supersaturation cutoff. This method enables one to rapidly deter-mine the position of the zone in which the nucleation proceeds at the highest rate. The position of the zone of nucleation found by this method is in good agreement with the results of calculations based on experimental data and theoretical calculation of the rate of nucleation by an exact formula that has been recently derived based on the works by Kusaka and Reiss, as well as the Frenkel liquid kinetics theory. The surface tension of critical sulfur nuclei resulting from the nucleation is calculated based on this formula and experimental data on the nucleation. It is established that, in a temperature range of 312–319 K, the critical nuclei have tension surface radius R s ∼ 10.6 Å and surface tension σ = 72.5 ± 1.1 dyn/cm. The surface tension of critical sulfur nuclei in this temperature range is constant and approximately 5% higher than that of a planar surface.