Investigating Feasibility Through Performance Analysis of Green Dielectrics for Sustainable Electric Discharge Machining

This work represents a feasibility study for the newly proposed vegetable oil-based green dielectric fluids, biodielectric1 (BD1) and biodielectric2 (BD2) for electric discharge machining (EDM). Comparative analyses for BD1, BD2, and kerosene have been studied to assess the performance in terms of material removal rate (MRR), electrode wear rate (EWR), and relative wear ratio (RWR) for P20 + cold-worked plastic injection mold steel using electrolytic grade copper electrode. Current, gap voltage, pulse on time (Ton), and pulse off time (Toff) have been chosen as input parameters, and one variable at a time approach has been used for designing experimental plan for investigating the feasibility of the newly suggested fluids. The results obtained show that the performance of the newly suggested biodielectrics BD1 and BD2 is better than commercially used hydrocarbon-based dielectric, i.e., kerosene, for MRR and RWR. Analysis of variance results indicated that current is the most influencing parameter for MRR and EWR, while Ton is the most significant parameter for RWR. Under the influence of current, BD1 and BD2 produced 38% and 165% improvement in MRR, respectively. Moreover, BD1 and BD2 resulted 30% higher and 7% lower RWR, respectively, under the influence of Ton.