Photografting of unable‐to‐be‐irradiated surfaces. II. Batch liquid‐phase process by one‐step method

In this article, a batch liquid‐phase process was reported, by which the photo‐initiated grafting polymerization could be carried out on the dark surfaces that were not directly irradiated by UV light. In the reaction system, an aluminum foil was placed horizontally to reflect UV light back and form a dark area underneath where the grafting polymerization took place. The occurrence of the polymerization was demonstrated by gravitational analyses and XPS spectra. The factors affecting the grafting reaction have been studied and the results showed that increasing irradiation time, reaction temperature, and benzophenone concentration and decreasing distance (D) between the light area and the place where grafting reaction took place were beneficial to the grafting reaction. The highest grafting density was obtained at a acrylic acid concentration of 15 vol %. Moreover, some further investigations were also made.