This is the authors' abstract. We don't add key points for this paper.
We experimentally characterize the linear and nonlinear performance of a >70 nm, dual-stage, 19.5 dB average net gain discrete Raman amplifier using different nonlinear fibres in the second stage. We propose an architecture built with a combination of IDF and SMF and compare its performance with amplifiers built with conventionally used nonlinear fibre types (IDF-IDF, IDF-DCF). The measured FWM product power shows the IDF-SMF architecture to generate less nonlinear interference when compared to other schemes. We test the amplifiers with5 × 120Gb/s DP-QPSK WDM signals in a recirculating loop at 10 recirculations of 93.4 km SMF fibre, where the power sweep shows up to 2 dB optimum launch power difference, with the maximumQ²factor varying by up to 1.6 dB. Using the optimum transmission point, we measure aQ² = 8.8dB at 35 recirculations of 93.4 km transmission (3269 km) with the proposed IDF-SMF scheme, which is >460 km further than the other tested architectures. All characterized schemes performed similarly in the linear noise regime.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Krzczanowicz et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: