Controlled MoS 2 layer etching using CF 4 plasma

A few-layered molybdenum disulfide (MoS2) thin film grown by plasma enhanced chemical vapor deposition was etched using a CF4 inductively coupled plasma, and the possibility of controlling the MoS2 layer thickness to a monolayer of MoS2 over a large area substrate was investigated. In addition, damage and contamination of the remaining MoS2 layer surface after etching and a possible method for film recovery was also investigated. The results from Raman spectroscopy and atomic force microscopy showed that one monolayer of MoS2 was etched by exposure to a CF4 plasma for 20 s after an initial incubation time of 20 s, i.e., the number of MoS2 layers could be controlled by exposure to the CF4 plasma for a certain processing time. However, XPS data showed that exposure to CF4 plasma induced a certain amount of damage and contamination by fluorine of the remaining MoS2 surface. After exposure to a H2S plasma for more than 10 min, the damage and fluorine contamination of the etched MoS2 surface could be effectively removed.