On the Performances of CuxO-TiO2 (x = 1, 2) Nanomaterials As Innovative Anodes for Thin Film Lithium Batteries

CuxO-TiO2 (x = 1, 2) nanomaterials are synthesized on polycrystalline Ti substrates by a convenient chemical vapor deposition (CVD) approach, based on the initial growth of a CuxO matrix (at 400 and 550 °C for x = 1 and 2, respectively) and the subsequent overdispersion of TiO2 at 400 °C. All CVD processes are carried out in an oxygen atmosphere saturated with water vapor. The obtained systems are investigated by means of glancing incidence X-ray diffraction (GIXRD), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and electrochemical experiments. Galvanostatic charge/discharge measurements indicate that Cu2O-TiO2 nanomaterials exhibit very attractive high-rate capabilities (∼400 mA h g(-1) at 1 C; ∼325 mA h g(-1) at 2 C) and good stability after 50 operating cycles, with a retention of 80% of the initial capacity. This phenomenon is mainly due to the presence of TiO2 acting as a buffer material, i.e., minimizing volume changes occurring in the electrochemical conversion. In a different way, CuO-TiO2 systems exhibit worse electrochemical performances as a consequence of their porous morphology and higher thickness. In both cases, the obtained values are among the best ever reported for CuxO-based systems, candidating the present nanomaterials as extremely promising anodes for eventual applications in thin film lithium batteries.