Answers are grounded in this paper and cite their sources.
Electricity generation using microbial fuel cells (MFCs) was examined from corn stover waste biomass using samples prepared through either neutral or acid steam-exploded hydrolysis processes that convert the hemicellulose to soluble sugars. Maximum power densities in fed-batch tests using an air-cathode MFC were 371 ± 13 mW/m 2 and 367 ± 13 mW/m 2 for the neutral and acid hydrolysates (1000 mg-COD/L, 250 Ω). Power output exhibited saturation kinetics with respect to fuel concentration, with predicted maximum power densities of P max = 475 mW/m 2 and half-saturation constants of K s = 347 mg/L (neutral) and P max = 422 mW/m 2 and K s = 170 mg/L (acid). Coulombic efficiencies (CEs) were comparable to that found using carbohydrates in this type of MFC, with values ranging from 20 to 30% for both hydrolysates. All sugars (monomeric or oligomeric) were completely utilized, with overall biochemical oxygen demand (BOD) removal efficiencies of 93 ± 2% (neutral) and 94 ± 1% (acid). Power output could be increased by using a cathode containing a diffusion layer, resulting in maximum power densities of 810 ± 3 mW/m 2 (neutral) and 861 ± 37 mW/m 2 (acid). Power was further increased by increasing solution conductivity to 20 mS/cm, resulting in 933 mW/m 2 (neutral) and 971 mW/m 2 (acid) for the two hydrolysates. Additional increases in solution conductivity lowered the anode potential and did not increase power. These results demonstrate the potential for a new method of renewable energy production based on conversion of biomass to electricity using MFCs.
No takes yet. Share an insight, caveat, or question.
Zuo et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: