The interaction between a tri-pad slider and a rigid disk during "take-off" is characterized using phase demodulated laser interferometry and acoustic emission (AE). A double peak was observed in the AE signal during the "take-off". A biquadratic surface fit for the air bearing surface was used and it was found that the transition between the first peak and the second peak corresponds to a change in contact location from the rails to the tri-pad of the slider. The second peak is shown to correspond to a change in contact location from the leading to the trailing edge of the third pad. As the disk linear velocity increases, the tri-pad slider increases its pitch angle, but remains in contact with the disk, pivoting on the trailing edge of the tripad.
No takes yet. Share an insight, caveat, or question.
McMillan et al. (1997) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: