Design and test of modified bridge type superconducting fault current limiter with reverse magnetized core

To develop a DC reactor type Superconducting Fault Current Limiter (SFCL), the most important elements are superconducting magnets or inductors. Recently large size magnets have been developed, according with the improvement of high temperature superconducting wire. In the DC reactor type SFCL, the purpose of a magnet is to store the generated electric energy of the power system immediately after a fault. Therefore most inductors are designed with an air core since the magnetic core inductor is too easy saturated to absorb the energy. Therefore the inductor consumes so much superconducting wire to make a large inductance and these expensive coils are a weak point of the DC reactor type SFCL. To solve this problem, the Reverse Magnetization Bias (RMB) method is introduced. The energy capacity of magnetic core is expanded to several times. With a shorter length of HTC superconducting wire, a much improved effect was obtained in the 40 V prototype SFCL.