We have grown AlGaN/GaN high electron mobility transistor (HEMT) structures by plasma-assisted molecular beam epitaxy on free-standing n-GaN substrates grown by hydride vapor phase epitaxy. Reflection high energy electron diffraction patterns of the as-loaded wafers exhibit narrow streaks which persist throughout the growth. Atomic force microscopy shows smooth AlGaN surfaces with root-mean-square roughness of 10 Å over a 20×20μm2 area. High resolution x-ray diffractometry indicates that the AlGaN peak is ∼20% narrower than for similar structures grown on SiC. Hall mobilities, electron sheet densities, and sheet resistances were measured on ten 60×60μm2 Hall test patterns defined photolithographically across the surface of the 10×10mm2 sample. Buffer leakage measurements demonstrate that a Be:GaN layer effectively isolates the channel from the conductive substrate. Average sheet resistances and sheet densities were 380Ω∕◻ and 0.94×1013cm−2, respectively. These HEMT structures exhibit room-temperature Hall mobilities in excess of 1900cm2∕Vs. In addition, devices on these structures exhibit excellent pinch-off, low gate leakage, and saturated drain current densities of almost 700 mA/mm. Further details regarding the structural and electrical properties will be described along with device testing.
No takes yet. Share an insight, caveat, or question.
Storm et al. (2005) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: