Lanthanum gallate thin films were deposited by atomic layer epitaxy (ALE) at 325–425 °C from β-diketonate-type precursors, La(thd)3 and Ga(acac)3, and ozone. Films were grown on soda lime glass, Si(100), MgO-buffered Si(100), sapphire, MgO(100), SrTiO3(100) and LaAlO3(100) substrates. Good control of film stoichiometry was obtained by adjusting the La(thd)3/O3 to Ga(acac)3/O3 pulsing ratio. Stoichiometric LaGaO3 films contained only 0.4 at.% carbon and less than 0.2 at.% hydrogen as impurities. Films were transparent and uniform and their thickness could be accurately controlled by the number of deposition cycles. The as-deposited films were amorphous and became crystalline upon annealing. The annealed films grown on sapphire and MgO(100) substrates were polycrystalline LaGaO3 whereas a La4Ga2O9 phase was formed when the films grown on Si(100) and MgO-buffered Si(100) were annealed. Epitaxial and smooth LaGaO3 thin films were obtained on LaAlO3(100) after annealing at 850 °C, verified by measurements of the X-ray rocking curve of the (200) reflection and the AFM surface roughness.
No takes yet. Share an insight, caveat, or question.
Nieminen et al. (2001) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: