Rheological behavior and fiber orientation in slit flow of fiber reinforced thermoplastics

The flow behavior and fiber orientation in slit flow of a short fiber reinforced thermoplastic composite melt are investigated. A slit die with adjustable gap and interchangeable entrance geometries was designed and built. The slit die is fed by a single screw extruder. The bulk viscosity is calculated from the axial pressure profiles measured using three flush mounted pressure transducers. The effect of entrance geometry and gap dimensions on the fiber orientation and bulk flow behavior is specifically considered. A skin‐core composite fiber orientation is observed in the thickness direction. Fibers are oriented in the flow direction and parallel to the walls in the skin region irrespective of the entrance geometry. Different fiber orientation distributions in the core region can be realized by using different entrance geometries. However, the changes in the core fiber orientation are not fully reflected by the measured viscosities, due to highly oriented skin layer. Exit pressures obtained by extrapolation of linear pressure profiles are found to be all positive, but dependent on the die geometry and entrance conditions, even for the unfilled melts.