Characterization of wollastonite-reinforced HAp-Ca polycarboxylate composites

The effects of wollastonite on the mechanical properties and in vitro behavior of hydroxyapatite-Ca polyacrylate composites were studied. Powder mixtures of tetracalcium phosphate, poly(acrylic-co-itaconic), and wollastonite fibers (< or =75% by weight) were hot-pressed for 30 min at 300 degrees C and 60 kpsi. Tensile strengths, elastic moduli, and microstructures of the composites were investigated. The tensile strengths of these composites were improved by the addition of wollastonite fibers, whereas the elastic moduli decreased. The highest value of tensile strength (approximately 155 MPa) was achieved by the addition of 40% wollastonite. Composites were immersed in simulated body fluid (SBF) for up to 14 days and then in 1.5 SBF for a week. The changes in the concentrations of Ca, Si, and P ions and the pH of these solutions indicate bioactivity. An evaluation of the microstructures of the composites after SBF immersion indicated that apatite layers had formed on the surfaces of the composites.