Image-Free Microwave Photonic Down-Conversion Approach for Fiber-Optic Antenna Remoting

For commercial and military applications, it is highly desired to acquire broadband radio frequency (RF) signals from remotely located receiving antennas to the central office (CO) for centralized signal processing such as down-conversion. In this paper, a photonic approach for image-free microwave frequency down-conversion is proposed for antenna remoting scenarios. The RF signal is captured by the phase modulator (PM) at remote antenna unit and transmitted over a long fiber link to the CO for performing frequency down-conversion. In analog, with the Hartley architecture in the electronic domain, two in-phase (I) and quadrature (Q) intermediate frequency (IF) components are generated by using an electro-optic polarization modulator (PolM) and two polarizers. To achieve large image rejection ratio (IRR), the digital post-processing technique is introduced to accurately compensate the amplitude and phase imbalances between the I and Q IF signals. In the experiments, a 2-km single-mode fiber link is inserted between the PM and PolM. As the local oscillator signals are set as 35 and 3 GHz, two target sinusoidal signals at 35.5 and 3.1 GHz are applied with two image signals, a sinusoidal signal at 34.5 GHz and a broadband RF signal centered at 2.9 GHz, respectively. Then, both real-time analog and off-line digital processing methods are used to process the generated I and Q IF signals for image rejection, yielding an IRR over 45 and 60 dB respectively, when the sinusoidal image signal is applied. The distortions from the broadband 2.9-GHz image RF signal are also effectively suppressed by using the two processing methods. The proposed approach is capable of covering a wide frequency range from 5 to 40 GHz.