The formation mechanism of inclusions in Si-killed 304 stainless steel was studied by industrial experiments during GOR refining process and thermodynamic calculations. A lager number of CaO-SiO 2 -MgO-Al 2 O 3 -MnO-CrO x liquid spherical inclusions with different size (from 1 μm to 22 μm) had been found after deoxidization of FeSi alloy in 10 minutes. The calculation result of FactSage 6.3 software assisted in confirming that the inclusions in size of less than 5 μm that had less than 30 % CaO mainly came from the deoxidation of FeSi alloy with Ca and Al. The inclusions in size of more than 5 μm that had more than 30 % CaO mainly came from the modification of involved slag droplets through the oxidation of Si and Al and the collision with deoxidation-type inclusions, and the degree of change was bigger for smaller inclusions. The MgO in slag and refractory was reduced by Si and Al in steel, which leaded to the unceasingly increase of Mg content in steel. Subsequently, SiO 2 , MnO and CrO x in inclusion were reduced by Mg, which resulted in the increase of MgO content in inclusion and the degree of increase of MgO content was greater for the larger size of inclusions.
No takes yet. Share an insight, caveat, or question.
Li et al. (2017) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: