Manipulating the separation performance of nanofiltration membranes by coating thickness of organic phase during interfacial polymerization

Nanofiltration (NF) membranes have excellent separation capabilities and selective performance, and are widely applied in the field of concentration and separation of salt and inorganic salt mixtures. In this article, NF membranes with a higher comprehensive performance were fabricated using a thinner coated organic phase during interfacial polymerization, which greatly reduced the rejection of sodium chloride and significantly improved the water flux without reducing the rejection of magnesium sulfate. Structure comparison found that thinner polyamide separation layer resulted in the higher crosslinking degree, smaller particle, and relatively rough surface. Based on these analyses, we hypothesized that thermodynamically efficiency in the system varies with the coating thickness. Finally, the mechanism of the influence of the coating thickness of organic phase during heat treatment on the interfacial polymerization process and membrane structure was discussed.