The interaction of a rotating impeller and the working fluid introduce forces on the rotor. These fluid-induced forces can cause self-excited whirl, where the moves away from and whirls along a trajectory eccentric to its undeflected position. When designing a turbomachine, particularly one which is to operate at speed, it is important to be able to predict the fluid-induced forces, both steady and unsteady, acting on the various components of the machine. The fluid-induced forces acting upon the impeller and therefore on the bearings was investigated for a centrifugal impeller in a spiral volute in the presence of cavitation. experiment in forced vibration was made to study the fluid-induced rotordynamic force on an impeller whirling around its machine axis of rotation water. The whirl trajectory of the rotor is prescribed to be a circular orbit a fixed radius. A dynamometer mounted behind the rotor and rotating with it the force on the impeller. The force measured is a combination of a steady force due to volute asymmetries and an unsteady force due to the eccentric of the rotor. These measurements have been carried out over a full range of /impeller speed ratios at different flow coefficients for various turbomachines. destabilizing force was observed over a region of positive whirl ratio. Cavitation corresponding to a three percent head loss did not have a significant effect upon this destabilizing force. However, a lesser degree of cavitation at the design point for the impeller-volute combination tested increased this destabilizing force for a particular set of whirl ratios.
No takes yet. Share an insight, caveat, or question.
Ronald John Franz (1989) studied this question.