A simple method for including shear deformations in thin plate elements

A method is described for including the effect of shear deformations in existing thin plate finite elements, and thereby extending their range of application to include moderately thick plates. The method does not add extra degrees of freedom to the final element, so the thick and thin plate elements can be used interchangeably, and the thick plate solution is not appreciably more expensive than the thin plate solution. It is assumed that the shear deformations are constant over the element and, to account for this, two extra internal shear strain variables are added to the element. Various methods for eliminating these internal variables are examined but it is shown to be impossible to simultaneously satisfy both the constant bending moment and constant shear patch tests, except for parallelograms. However, one method gives elements which pass the constant shear patch test and, although failing the constant bending moment patch test for arbitrary geometries, gives errors which are small enough to be neglected in most engineering applications. This method has been applied to a triangular plate element and it is shown that the results obtained with this element converge (for all practical purposes) to the correct thick plate results.