Answers are grounded in this paper and cite their sources.
The first stage of the H-2 rocket used a 110-ton thrust liquid oxygen, liquid hydrogen, pump-fed engine, the LE-7. This engine required high-pressure and high-power liquid oxygen and liquid hydrogen turbopumps to achieve the two-stage combustion cycle in which the combustion pressure is around 13 MPa. Furthermore, it was very important to operate both turbopumps at higher rotational speeds to obtain a smaller, lighter-weight engine because the LE-7 had not low-speed, low-pressure pumps ahead of both the main pumps. The present paper shows the design, test results, and modifications that had been performed until a flight-type liquid oxygen turbopump for the LE-7 engine was completed. The liquid oxygen turbopump had been developed by the use of three models, that is, research, prototype, and flight models.
No takes yet. Share an insight, caveat, or question.
Kamijo et al. (2001) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: