Diode laser-induced thermal damage evaluation on the retina with a liposome dye system

BACKGROUND AND OBJECTIVES: The aim of the study was to evaluate the feasibility of retinal thermal damage assessment in a rabbit eye model by using laser-induced release of liposome-encapsulated dye. STUDY DESIGN/MATERIALS AND METHODS: After anesthesia, thermosensitive liposomes (DiStearoyl Phosphatidyl Choline: DSPC) loaded with 5,6-carboxyfluorescein were injected intravenously to pigmented rabbits. Retinal photocoagulations were performed with a 810nm diode laser (P=100-400 mW, laser spot=500 microm, 1s) (OcuLight, IRIS Medical Instruments, Mountain View, CA). Fluorescence measurements in the area of the laser exposures were then realized with a digitized angiograph (CF-60UVi, Canon-Europe, The Netherlands; OcuLab, Life Science Resources, UK). RESULTS: Fluorescent spots were observed for power ranging from 100 +/- 5 mW to 400 +/- 5 mW. The fluorescence intensity increased linearly with the power and reached a plateau at 280 +/- 5 mW. The fluorescence intensity was correlated to the maximum temperature at the center of the laser spot with a linear increase from 42 +/- 3 degrees C to 65 +/- 3 degrees C. These results are in agreement with our two previous studies with DSPC liposomes for temperature measurements in a tissue model and then in a vascular model. CONCLUSION: This preliminary study demonstrates the possibility of a laser-induced release of liposome-encapsulated dye for a quantification of diode laser induced thermal damage in ophthalmology. Such a method could be useful for a real-time monitoring of laser photocoagulation for conditions such as choroidal neovascular membranes when a precise thermal damage is required near the foveolar area.