Four-Channel Multidetector CT in Facial Fractures: Do We Need 2 × 0.5 mm Collimation?

OBJECTIVE: Our aim was to optimize acquisition protocols and multiplanar reformation algorithms for the evaluation of facial fractures using multidetector CT (MDCT) and to determine whether 2 x 0.5 mm collimation is necessary. MATERIALS AND METHODS: A cadaveric head with artificial blunt facial trauma was examined using a four-channel MDCT scanner. The influence of acquisition parameters (collimation, 2 x 0.5 mm, 4 x 1 mm, 4 x 2.5 mm; tube current, 120 mAs, 90 mAs, 60 mAs), image reconstruction algorithms (standard vs ultra-high-resolution modes; reconstructed slice thicknesses, 0.5 mm, 1 mm, 3 mm; increment, 0.3 mm, 0.6 mm, 1.5 mm), and reformation algorithms (slice thicknesses, 0.5 mm, 1 mm, 3 mm; overlap, 0.5 mm, 1 mm, 3 mm) on detectability of facial fractures in multiplanar reformations with MDCT was analyzed. RESULTS: Fracture detection was significantly higher with thin multiplanar reformations (0.5 and 0.5 mm, 1 and 0.5 mm, and 1 and 1 mm) (p < or = 0.014) acquired with 2 x 0.5 mm collimation (p < or = 0.046) in ultra-high-resolution mode (p < 0.0005) with 120 mAs (p < or = 0.025). Interobserver variability showed very good agreement (kappa > or = 0.942). Non-ultra-high-resolution mode, lower milliampere-seconds, and thick multiplanar reformations (3 and 0.5 mm, 3 and 1 mm, and 3 and 0.5 mm) showed significantly decreased fracture detectability. CONCLUSION: Although thin multiplanar reformations obtained from thin collimation (2 x 0.5 mm) are statistically superior for the detection of subtle fractures, 4 x 1 mm collimation is sufficient for routine diagnostic evaluation. Ultra-high-resolution mode with 120 mAs is mandatory for detection of clinically relevant fractures.