The effect of paraffin on fiber dispersion and mechanical properties of polyolefin–sawdust composites

This article reports on the influence of the paraffin (PAR) on the wood fiber (WF) dispersion in different polyethylene (low‐density polyethylene, high‐density polyethylene, recycled polyethylene) matrices, as well as on the melt flow behavior and mechanical properties of WF‐reinforced polyethylene (PE) composites. In the presence of paraffin, the composites showed improved tensile and flexural strength and modulus, but lower impact strength and elongation at break. The extent of improvement in mechanical properties depends on paraffin content and type of polyethylene; the most effective paraffin was in LDPE‐based composites. Paraffin‐treated WF showed lower moisture absorption ability in comparison with unmodified wood fiber. The phase segregation process was investigated for PE/PAR blends by DSC method. It was shown that an increase of paraffin concentration in the PE/PAR blend leads to a decrease of PE melting temperature and an increase of paraffin melting temperature; it indicates a net exchange of material from paraffin towards polyethylene. However, generally both components of PE/PAR blends remain immiscible.