Ultrasonic Spray Processed, Highly Efficient All-Inorganic Quantum-Dot Light-Emitting Diodes

All-inorganic and low-cost quantum-dot light-emitting diodes (QLEDs) are always desired considering the easy processing and outstanding physical and chemical stability of inorganic oxides. Herein, efficient all-inorganic QLEDs are demonstrated by using NiO and ZnO as the charge transport layers fabricated via ultrasonic spray processes. Excellent device performance is achieved thanks to the introduction of an Al 2 O 3 interlayer between quantum dots (QDs) and an amorphous NiO layer. Transient photoluminescence and electricity measurements indicate that the Al 2 O 3 layer can suppress the exciton quenching induced by the NiO layer and reduce the electron leakage from QDs to NiO. In consequence, relative to that of a device without an Al 2 O 3 layer, the efficiency of an Al 2 O 3 -containing device is enhanced by a factor of 539%, increasing from 3.8 cd/A to 20.5 cd/A, and it exhibits color-saturated green emission (peak at 530 nm) and high luminescence (>20 000 cd/m 2 ). These are the best performances for all-inorganic QLEDs reported to date. Meanwhile, it is demonstrated that ultrasonic spray is a feasible and cost-effective technology to construct efficient all-inorganic QLEDs. We anticipate that these results will spur the progress toward realization of high performance and mass production of all-inorganic QLEDs as a platform for QD-based full-color displays.