A 1-D Photonic Band Gap Tunable Optical Filter in (110) Silicon

In this paper, we describe an electrostatically tunable optical bandpass filter that is fabricated in (110) silicon. Deep reactive-ion etching is the main process that is used to fabricate the overall device structure. To create the highly parallel surfaces that are needed for the photonic band gap elements, electrochemical (KOH) etching of the vertical (111) planes is then used. Back etching is used to release the moving parts. Fiber pigtails are attached in etched alignment grooves, and fiber-fiber insertion loss below 11 dB was obtained. The measured passband width was 3 nm with a tuning range of 8 nm.