Creep resistance of Fe–Ni–Cr heat resistant alloys for reformer tube applications

Relations between microstructure, phase transformations and creep resistance of austenitic Fe–Ni–Cr alloys are investigated. As-cast alloys with different silicon contents and an ex-service tube are submitted to laboratory agings to trigger specific phase transformations, and subsequently creep-tested at 950°C under stresses of 24–48 MPa. As-cast microstructures contain interdendritic chromium-rich M 7 C 3 carbides with niobium-rich MC carbides. After aging at 950°C, primary M 7 C 3 carbides transform into chromium-rich M 23 C 6 carbides, associated to a loss in creep strength. The G phase present in the ex-service alloy is reversed into MC carbides by a heat treatment at 1100°C, associated to a slight decrease in creep resistance. Besides, the addition of silicon is highly detrimental to creep strength. Results can be used for alloy design.