In Situ Pore Pressure Responses of Native Peat and Soil under Train Load: A Case Study

Settlement and formation of piping holes on surfaces were observed along a rail embankment subject to normal traffic load. Piezometers were installed in the native peat and soil underneath the embankment inside and outside problematic area to measure the pore pressure responses during train traffic. Peculiar pore pressure responses were observed. Cyclic pore pressures were only measured during the first 60–80s of the 6-min train passage, and thereafter the pressures decayed rapidly to the initial values. The pore pressure changes in the shallow peat layer were lower than those in the deep soil layer. Possible mechanisms causing such peculiar pore pressure responses, surface settlement, and piping holes were explored and identified. It was found that the stiffness contrast between the stiff, upper granular fill and the soft, native peat material could lead to a redistribution of tensile stress in the granular fill layer to the peat layer due to the moving train load. This stress redistribution promotes the propensity of vertical piping in the peat layer.