Surface modification of single‐walled carbon nanotubes with polyethylene via in situ Ziegler–Natta polymerization

Single‐walled carbon nanotubes (SWNTs) were modified with polyethylene (PE) prepared by in situ Ziegler–Natta polymerization. Because of the catalyst pretreated on the surface of the SWNTs, the ethylene was expected to polymerize there. Scanning electron microscopy images and solubility measurements showed that the surface of the SWNTs was covered with a PE layer, and a crosslink may have formed between the SWNTs and PE. When the SWNTs covered with a PE layer were mixed with commercialized PE by melt blending, the resulting composite had better mechanical properties than the composite from the SWNTs without a PE layer. The yield strength, the tensile strength and modulus, the strain at break, and the fracture energy of the modified‐SWNT/PE composites were improved by 25, 15.2, 25.4, 21, and 38% in comparison with those of the raw‐SWNT/PE composites.