⌘+K

Pulse Explore Communities Researchers Journals

Home Communities Explore

January 1, 2015Advances in Science and Technology – Research JournalOpen Access

Analysis of the Surface Profile and Its Material Share During the Grinding Inconel 718 Alloy

Martin Novák Nataša Náprstková Jerzy Jóźwik

View Full Paper

Ask AI

Bookmark

Share

Abstract

Grinding is still an important method for surface finishing. At FPTM JEPU research, which deals with this issue is conducted. Experiments are carried out with grinding various materials under different conditions and then selected components of the surface integrity are evaluated. They include roughness Ra, Rm and Rz, Material ratio curve (Abbott Firestone curve) and also the obtained roundness. This article deals with grinding nickel Inconel 718 alloy, when selected cutting grinding conditions were used and subsequently the surface profile and the material ratio curve were measured and evaluated.

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Novák et al. (2015) studied this question.

synapsesocial.com/papers/6a9b00ad78e23635408abddc https://doi.org/10.12913/22998624/2363

View Full Paper

Ask AI

Bookmark

Share

Keep reading

Synapse has enriched 5 related papers. Consider them for comparative context:

1Friction stir welding AA6061-T6 with multi-objective optimization of parametersAdvances in Science and Technology – Research Journal · Wed,
2Using artificial intelligence to optimize gcode files for fused filament fabrication/ fused deposition modeling technologyAdvances in Science and Technology – Research Journal · Wed,
3Influence of process parameters in tungsten inert gas welding of titanium supported by you only look once – based defect detection algorithmAdvances in Science and Technology – Research Journal · Fri,
4Supply chain risk management in constructionAdvances in Science and Technology – Research Journal · Fri,
5Deflection and crack analysis of single span concrete beams reinforced with basalt fiber reinforced polymer barsAdvances in Science and Technology – Research Journal · Tue,

More from Advances in Science and Technology – Research Journal

Study of the behavior of thin-walled composite structures with closed sections under three-point bending testsSun,
A review of the state-of-the-art in improving piezoelectric propertiesSun,
A study on the optimization of superplasticizer and water-to-binder ratio for enhancing 3D printable concrete with marble powder wasteSun,
The influence of the structural steel grade and galvanizing time on the thickness and surface condition of the applied coatingsSat,
The effects of two-phase partial annealing on the impact energy absorption of AR400 steelSat,