Answers are grounded in this paper and cite their sources.
Tar reduction and monitoring is the major stake for gasification processes. Pyrolysis is the precursor mechanism of the gasification of solid fuels and tar production. The evolution of gas and tar composition produced from wood chips pyrolysis was investigated in a tubular reactor as a function of its wall temperature (700–1000 °C, with gas mean residence times of 1.1–2.7 s). High thermal severities lead to the “gasification” regime, promoting gas production from tar conversion. Tar (benzene, toluene, o - and m -xylenes, phenol, indene, o -, m -, and p -cresols, naphthalene, 1- and 2-methylnaphthalenes, acenaphthylene, and phenanthrene) were quantified by gas chromatography/mass spectrometry (GC/MS) analysis using deuterated internal standards. Closed mass balances were obtained. A simplified chemical scheme of secondary tar conversion is proposed. Under the investigated range of thermal severity, CH 4 production is mainly controlled by aromatic tar demethylation. Linear relations were observed between the molar production of benzene and CH 4 and between all quantified tars and C 2 H 4 (ethene). CH 4 and C 2 H 4 could thus be analyzed by direct online methods and used as indicators of the tar content and speciation for gasifier monitoring. The validity of these relations depends upon the thermal conditions of reactors and biomass composition. These relations could be suitable for dual-fluidized-bed gasifiers because H 2 O has very few chemical effects on hydrocarbon thermal conversion.
No takes yet. Share an insight, caveat, or question.
Dufour et al. (2011) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: