Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties

Ceramic parts manufactured by lithography‐based ceramic manufacturing ( LCM ) excel in resolution and surface quality. The material for LCM is a photosensitive ceramic particle‐filled slurry which needs to have homogeneous properties over time and during each processing step. The goal of this study was to use “mechanical” stabilization for a tricalcium phosphate‐filled slurry done by increasing slurry viscosity, solids loading, or inducing thixotropic behavior. The modified slurries were compared with a nonstable reference slurry. While all methods lead to increased storage stability, only the stabilized slurry with 0.5 wt% fumed silica is stable during the printing process.