The effectiveness of maleic anhydride grafted ethylene propylene diene monomer rubber (EPDM-g-MAH) as an interfacial compatibilizer in enhancing the extent of interaction between natural rubber (NR) matrix and organoclay (OC) nanolayers, and also the eventually developed microstructure during a melt mixing process, has been evaluated as an alternative material to be used in place of commonly used epoxidized NR with 50 mol % epoxidation (ENR50). The latter usually weakens the processability of the final compound. The curing behavior, rheological, and dynamic mechanical properties of the prepared nanocomposites have been evaluated. Microstructural characterizations revealed better interfacial compatibilization by EPDM-g-MAH than ENR50, which is attributed to the lower polarity of the EPDM-g-MAH and hence more affinity for the NR matrix to be diffused onto the galleries of OC. This was confirmed with transmission electron microscopy (TEM) examination and higher elasticity exhibited by the unvulcanized NR/OC/EPDM-g-MAH nanocomposites in melt rheological measurements. Also, lower damping behavior was observed for the vulcanized NR/OC/EPDM-g-MAH samples. These imply intensified polymer–filler interfacial interaction and hence restricted viscous motions by the NR segments. Vulcanized NR/OC nanocomposites compatibilized with EPDM-g-MAH showed greater enhancements in tensile properties than the sample compatibilized with ENR50.
No takes yet. Share an insight, caveat, or question.
Tavakoli et al. (2011) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: