Oxidative Stability of Amino Polymer–Alumina Hybrid Adsorbents for Carbon Dioxide Capture

Amine/oxide hybrid carbon dioxide adsorbents prepared via impregnation of low molecular weight polymeric amines into porous oxide supports are among the most promising solid adsorbents developed for postcombustion CO 2 capture or CO 2 extraction from ambient air. The oxidative stability of adsorbents prepared by impregnation of poly(ethylenimine) (PEI) or poly(allylamine) (PAA) into mesoporous γ-alumina under humid oxidation conditions is evaluated in this work. The PEI-based adsorbents, which contain primary, secondary, and tertiary amines, are shown to degrade drastically at elevated temperatures (110 °C) and in high oxygen concentrations (21%, akin to air), with these effects reduced by both reductions in temperature (70 °C) and oxygen concentration (5%, akin to flue gas). The oxidation behavior of PEI-based adsorbents supported on alumina is qualitatively similar to past work on silica-supported PEI adsorbents. In contrast, the alumina-supported PAA adsorbents that contain only primary amines show significantly improved oxidative stability, losing only 10% or less of their original CO 2 capacity after prolonged oxidative treatment under a variety of conditions. Analysis of the fresh and thermally treated samples by Fourier transform (FT) IR, FT-Raman, and 13 C NMR spectroscopies demonstrates the clear formation of carbonyl functionalities over the oxidized PEI-based adsorbents, whereas no significant changes in the spectra for PAA samples are observed after oxidative treatments. The collected data demonstrate that secondary-amine-free, primary-amine-rich polymers such as PAA may be used to formulate supported amine adsorbents with improved oxidative stability compared to adsorbents based on PEI, which is used ubiquitously in the field today.