The Influence of Bulking Material Type and Volume On In-house Composting in High-Rise, Caged Layer Facilities

In-house composting involves treating manure where it accumulates on the floor of high-rise, caged layer facilities. This process produces a partially composted material and can aid in house fly (Musca domestica L.) control by generating temperatures in the thermophilic range (≥43°C). Two trials were conducted to determine the effect of material volume and the use of previously composted material (starter) or wheat (Triticum aestivum L.) straw as bulking agents on compost temperatures and material properties. In Trial 1, starter combined with wheat straw or wheat straw alone were added to separate quadrants in a layer building, formed into windrows, and turned biweekly. Temperatures were consistently higher with the starter treatment, but both treatments followed a distinct pattern where temperatures peaked on the day of turning and declined rapidly thereafter. The starter treatment had higher initial volume (0.19 m3 m−1 row) than straw alone (0.13 m3 m−1 row), and maintained proportionately higher volumes throughout the trial. Volume in both treatments increased linearly with time and was correlated with peak compost temperature on the day of turning. Regression analysis indicated that a critical volume of 0.18 m3 m−1 row was required to consistently achieve compost temperatures ≥43°C. In a second trial, starter alone was compared to wheat straw at two rates. Volumes for all treatments initially ranged from 0.20 to 0.28 m3 m−1 row and increased linearly throughout the trial. Temperatures consistently exceeded 43°C on the day of turning. Analysis of the materials from both trials indicated that starter or straw had little effect on %moisture, %carbon, %nitrogen, or carbon:nitrogen ratio of composting materials beyond the first week after windrow establishment. These results indicate that material volume is more important than the use of starter or straw materials as bulking agents to achieve in-house composting temperatures ≥ 43°C.