Persistent Mode MgB₂ Short Windings

Feasibility of industrial production of MgB2cables and magnets has been established, thus leading to MRI systems realization. Apart from continuing the development in performances of both cable and magnet, a further important step consists in applying superconductive junctions to windings, to obtain a better field stability. In 2006 a technique to obtain some tens of Ampere in persistent mode operation in a joined MgB2cable was found. Since then, short windings were repetitively built to test the progress of the performances of the junctions. Among them, a single junction, five meter long windings with a diameter of 260 millimeter were put in persistent mode (i. e. with total resistance less than 10-14Ohm) with 300 Ampere circulating at 20 Kelvin, self-field; also windings with two junctions and about one meter long with the same diameter were put in persistent mode with 200 Ampere circulating at 20 Kelvin, self-field.