Kinetic studies of photopolymerization using real time FT‐IR spectroscopy

The real time FT‐IR (RT/FT‐IR) technique has been recognized as a very vital tool to quantitatively study the curing parameters such as the effects of initiator (or catalyst) type and concentration, accelerator, stabilizer, irradiation wavelength, temperature, and curing environments. Herein, our results in studies of photoinduced polymerizations for adhesive and coating applications are reported. The photoinduced polymerizations studied included anionic and hydrosilation (a polyaddition polymerization) reactions. In photoinduced anionic polymerization our studies for ethyl cyanoacrylate polymerization are described. The effect of the concentration of photoinitiator and inhibitor on the ethyl cyanoacrylate polymerization kinetic rate will be discussed. In photoinduced catalytic hydrosilation reaction studies, the effects of the catalyst concentration and staging irradiation are disclosed. The hydrosilation reaction was monitored using a SiH silicone hydride stretching band located at 2169 cm−1. The cyanoacrylate polymerization was monitored using the CC stretching band occurring at 1617 cm−1. The hydrosilation conversion was completed with an appropriate formulation. For monofunctional cyanoacrylate monomer, the photoinduced conversion to straight chain polymer was approximately 85% for a 60 s period. The intrinsic rates of the reactions were calculated for kinetic comparisons. For very fast cyanoacrylate polymerization studies, new FT‐IR kinetic software was used to collect 204 spectra/min. Some detailed experimental techniques and polymerization reaction mechanisms are also discussed.