Answers are grounded in this paper and cite their sources.
Laboratory investigation reveals enhanced shear strength and durability in biopolymer-biomineralized calcareous silt, indicating a viable low-carbon stabilization strategy for slopes.
Calcareous silt is susceptible to degradation under climatic variations, particularly wetting–drying (W-D) cycles. This study investigates the synergistic effects of xanthan gum (XG) and enzyme-induced carbonate precipitation (EICP) on the shear strength of calcareous silt under varying moisture contents and W-D cycles. Five XG dosages (0%–1.2%), two moisture contents (2% and 10%), and four W-D cycle numbers (0, 4, 8, and 12) were considered, with direct shear tests and discrete element method (DEM) simulations conducted. At the optimum dosage of 0.9% XG, the XG–EICP composite increased peak shear strength by 190%–273% and cohesion by 3.7 times relative to plain soil, whereas EICP-only treatment yielded limited cohesion gain. Raising moisture content from 2% to 10% substantially reduced cohesion across all treatments, yet the 0.9% XG–EICP composite retained the highest cohesion. After 12 W-D cycles, XG–EICP soil showed only 21.2% cohesion reduction, versus 32.1% for XG-only treatment. DEM simulations revealed that the composite produced the narrowest shear band (51.3% reduction) and the densest force-chain network, with the highest average contact force increment (51.9%). These findings confirm that XG–EICP composites offer a durable, low-carbon stabilisation strategy for calcareous silt slopes.
No takes yet. Share an insight, caveat, or question.
Ni et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: