Automatic detection of annual rings and pith location along Norway spruce timber boards using conditional adversarial networks

In the woodworking industry, detection of annual rings and location of pith in relation to timber board cross sections, and how these properties vary in the longitudinal direction of boards, is relevant for many purposes such as assessment of shape stability and prediction of mechanical properties of timber. The current work aims at developing a fast, accurate and operationally simple deep learning-based algorithm for automatic detection of surface growth rings and pith location along knot-free clear wood sections of Norway spruce boards. First, individual surface growth rings that are visible along the four longitudinal sides of the scanned boards are detected using trained conditional generative adversarial networks (cGANs). Then, pith locations are determined, on the basis of the detected growth rings, by using a trained multilayer perceptron (MLP) artificial neural network. The proposed algorithm was solely based on raw images of board surfaces obtained from optical scanning and applied to a total of 104 Norway spruce boards with nominal dimensions of 45× 145× 4500\,mm³ 45 × 145 × 4500 mm 3 . The results show that optical scanners and the proposed automatic method allow for accurate and fast detection of individual surface growth rings and pith location along boards. For boards with the pith located within the cross section, median errors of 1.4 mm and 2.9 mm, in the x- and y-direction, respectively, were obtained. For a sample of boards with the pith located outside the board cross section in most positions along the board, the median discrepancy between automatically estimated and manually determined pith locations was 3.9 mm and 5.4 mm in the x- and y-direction, respectively.