Synthesis–structure–performance relationship of cocondensed phenol–urea–formaldehyde resins by MALDI‐ToF and 13C NMR

Matrix assisted laser desorption ionization time of flight (MALDI‐ToF) mass spectrometry has consistently confirmed on a number of PUF resins that phenol–urea cocondensates exist in phenol–urea–formaldehyde (PUF) resins. A noticeable proportion of methylene‐linked phenol to urea cocondensates were detected in all the PUF resins tried, alongside methylene bridges connecting phenol to phenol and urea to urea. The PUF, PF, and UF oligomers formed were identified. Variations of the PUF preparation procedure did always yield a certain proportion of the mixed phenol to urea cocondensates. Their relative proportion was determined and related the synthesis procedure used. Comparison of the MALDI‐ToF results with a 13C NMR investigation showed that in a real PUF resin in which phenol to urea cocondensates were identified the methylene bridge NMR signal at 44 ppm, characteristic of phenol to urea unsubstituted model compound cocondensates, does not appear at all. This confirmed that this peak cannot be taken as an indication of the existence of phenol and urea condensation under actual resin preparation conditions. The peak indicating cocondensation in PUF resins in which the phenolic nuclei and urea are substituted appears instead at 54.7–55.0 ppm. Thermomechanical analysis has again confirmed that the resin gel times greatly accelerates with increasing urea molar content.