Polypropylene fibers fabricated via a needleless melt‐electrospinning device for marine oil‐spill cleanup

Ultrafine polypropylene (PP) fibers as oil sorbents were fabricated via a needleless melt‐electrospinning device and were characterized by scanning electron microscopy and contact‐angle analysis. PP fibers of various diameters and porosities were obtained by the manipulation of the applied electrical field. The effects of the fiber diameter and porosity on the oil‐sorption capacity and oil‐retention behavior were investigated. The experimental results demonstrate that for fiber diameter on the microscale, the porosity played a paramount role in determining the oil‐sorption capacities. The maximum oil‐sorption capacity of the resulting PP fibers with regard to motor oil and peanut oil were 129 and 80 g/g, respectively; these values were approximately six to seven times that of commercial PP nonwoven fabricated through the melt‐blown method. In addition, even after seven sorption/desorption cycles, the oil‐sorption capacity of the chosen sample was still maintained around 80 g/g, and above 97%, oil could be recovered. This indicated excellent reusability and recoverability.