Cold plasma modification of boron nitride fillers and its effect on the thermal conductivity of silicone rubber/boron nitride composites

Hexagonal boron nitride (h‐BN) fillers were first coated with low‐molecular‐weight polydimethylsiloxane (PDMS) by solution dispersion and then treated in argon plasma for different times. The modified h‐BN fillers were characterized by high‐resolution transmission electron microscopy, X‐ray photoelectron spectroscopy, and contact angle analysis. The results revealed that a thin PDMS film several nanometers thick was tightly coated on the surface of the h‐BN filler after plasma treatment, and this thin film could not be removed by 48 h Soxhlet extraction with n ‐hexane at 120°C. Furthermore, the effect of plasma modification on the h‐BN filled silicone rubber composites was investigated. The results indicated that the plasma modification improved the interfacial interaction between h‐BN and the matrix, but hardly affected the distribution state of the h‐BN in the composites. The composites filled with the modified h‐BN exhibit significantly higher thermal conductivity than the composites filled with untreated h‐BN. POLYM. COMPOS., 2012.