Anaerobic bio-hydrogen production is the focus in the field of bio-energy resources. In this paper, a series of batch experiments were conducted to investigate the effects of several factors on anaerobic bio-hydrogen producing process carried out by pre-heated river sediments. The results showed that several factors such as substrate and its concentration, temperature and the initial pH value could affect the anaerobic bio-hydrogen production in different levels. At 35 degrees C and the initial pH of 6.5, using glucose of 20,000 mg COD/L as substrate, the highest hydrogen production of 323.8 ml-H2/g TVS in a 100 ml batch reactor was reached, the specific hydrogen production rate was 37.7 ml-H2/g TVS h, and the hydrogen content was 51.2%. Thereafter using the same pre-heated river sediments as seed sludge, continuous anaerobic bio-hydrogen production was achieved successfully in a lab-scale CSTR with gas-separator. At the organic loading rate of 36 kg COD/m3 d, the highest hydrogen production was 6.3-6.7 l-H2/l-reactor d, the specific hydrogen production was 1.3-1.4 mol-H2/mol-glucose, and the hydrogen content in the gas was 52.3%. The effluent of the bio-reactor contained some small molecular organics, mainly including ethanol, acetate, butyrate and their molar proportion is 1:1:0.6.
No takes yet. Share an insight, caveat, or question.
Zuo et al. (2005) studied this question.