This paper reviews eight previous studies on the variable-amplitude (VA) fatigue strength of structural steel details: (1) four studies in the finite-life regime in which the number of cycles to failure of the specimens are equal to or shorter than the number of cycles at the intersection between the sloped S-N line and the VA fatigue limit, hereafter called the transition life; and (2) four studies in the infinite-life regime that is, at numbers of cycles greater than the transition life. The VA data correlate well with the constant-amplitude data when the former are plotted in terms of an equivalent root-mean-cube stress range. The effects of the following variables on the fatigue strength of structural details are discussed: block sequence in a stress range spectrum, spectrum size, type of spectrum, minimum stress, and type of steel. A so-called long-life factor quantifies how far a type of detail was cycled into the finite-life regime. Based on the results of the literature review, the writers recommend that the current AASHTO log-log bilinear equations for calculating the fatigue life be replaced with a single equation similar to the equation for predicting the fatigue crack growth rate in metals. This simplified model more accurately predicts the fatigue life near the VA fatigue limit.
No takes yet. Share an insight, caveat, or question.
Albrecht et al. (2009) studied this question.
Synapse has enriched one closely related paper. Consider it for comparative context: