Permeation and separation characteristics for aqueous alcoholic solutions such as methanol/water, ethanol/water and 1‐propanol/water were studied using a poly(dimethyl siloxane) membrane by pervaporation and evapomeation. Poly(dimethyl siloxane) membrane preferentially permeated alcohol from aqueous alcoholic solutions in both methods. The concentration of alcohol in the permeate by evapomeation was higher than that by pervaporation. However, the permeation rate for the former method was smaller than that for the latter method. In evapomeation with a temperature difference between the feed solution and the membrane surroundings, when the temperature of the membrane surroundings was kept constant and the temperature of the feed solution was raised, both the permeation rate and the permselectivity for ethanol increased with increasing temperature of the feed solution. On the other hand, as the temperature of the feed solution was kept constant and the temperature of the membrane surroundings was changed, the permeation rate decreased, but the permselectivity for ethanol increased remarkably with dropping temperature in the membrane surrounding. Under permeation conditions of a feed solution of 40°C and a membrane surrounding temperature of −30°C in evapomeation, an aqueous solution of 10 wt % ethanol in the feed was concentrated to about 90 wt % in the permeate. The permselectivity for alcohol was in the order of methanol
No takes yet. Share an insight, caveat, or question.
Uragami et al. (1992) studied this question.