Viscosity and retention of sulfonated polyacrylamide polymers at high temperature

The viscosity and retention of several copolymers of acrylamide (AM) with sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (PAMS), and also hydrolyzed polyacrylamide (HPAM) have been studied under aerobic condition with and without the sacrificial agent, isobutyl alcohol (IBA) added at a temperature of 80°C. Parallel experiments have been performed in synthetic seawater (SSW) and 5 wt % NaCl. The viscosity at high temperature has been studied as a function of aging time, shear rate, sulfonation degree, molecular weight, and concentration of IBA. The retention in porous medium for sulfonated polyacrylamide polymers was measured in core floods using outcrop Berea sandstone. For the studied polymer sacrificial agent may protect polymer structure at high temperature. Higher sacrificial agent concentration gives better thermal stability in both 5 wt % NaCl and SSW solvents. Sulfonation degree also has a direct effect on thermal stability, i.e., higher sulfonation degree lead to better thermal stability in terms of viscosity. By increasing temperature, less relative reduction in polymer solution viscosity was observed for the polymer with lower molecular weight. The presence of divalent ions at high temperature leads to strong reduction of HPAM polymer solution viscosity, but the viscosity is better maintained for PAMS copolymer solution at high temperature. The precipitation of HPAM first occurred after 3 months at 80°C and for PAMS copolymer with lowest sulfonation degree precipitation started after 7 months. For the studied polymers the retention was found to be relatively independent of temperature and compared to HPAM a much lower retention is observed for the sulfonated copolymers.