Sono-Fenton hybrid process on the inactivation of Microcystis aeruginosa: Extracellular and intracellular oxidation

For the first time, the inactivation of Microcystis aeruginosa using sono-Fenton process at low frequency high intensity (20 kHz, 0.42 W/mL) and high frequency low intensity (800 kHz, 0.07 W/mL) was investigated, respectively. 20 kHz sono-Fenton treatment successfully reduced cyanobacterial cell number from 4.19 × 10 6 cells/mL to 0.45 × 10 6 cells/mL within 5 min treatment. Alternatively, efficient performance of 800 kHz sono-Fenton process was observed to decrease Microcystis cell number to 2.33 × 10 6 cells/mL after 5 min inactivation, with lower energy cost. It was found that powerful 20 kHz sonication induced pore formation on the cell wall, leading to extracellular damage, while 800 kHz irradiation with low intensity triggered intracellular uptake of chemicals, suggesting endocytosis effects. Furthermore, sono-Fenton Processes were found to be affected by the concentrations of Fenton’s reagent, and pre-sonication time. Although solo Fenton treatment released microcystins in water, the degradation of microcystin-LR were achieved using 20 and 800 kHz sono-Fenton processes, respectively. The results of this work showed that severe extracellular oxidation is the vital inactivation mechanism of 20 kHz sono-Fenton process, while the internal oxidation caused by intracellularly delivered Fenton reagents is suggested to be the main cause of 800 kHz sono-Fenton inactivation, leading to much lower energy cost. This work provides alternative methods to control harmful cyanobacteria in water towards effective treatment.