Ultrathin Cobalt Phthalocyanine@Graphene Oxide Layer-Modified Separator for Stable Lithium–Sulfur Batteries

Rechargeable lithium–sulfur (Li–S) batteries have aroused great attention due to their high energy density and low cost. However, Li–S batteries suffer from rapid capacity decay owing to the shuttle effect of the intermediate polysulfides. To tackle this issue, functional separators with the ability to absorb polysulfides play a vital role to block them from passing through the separator. Herein, an ultrathin and lightweight layer of graphene oxide (GO) loaded with Co phthalocyanine (CoPc) is fabricated on a polypropylene (PP) separator. The thickness of CoPc@GO is about 200 nm with a low areal mass of 22 μg cm –2 . CoPc is uniformly dispersed on GO sheets through π–π interactions, which inhibits the shuttle effect and facilitates the conversion of the intermediate polysulfides. In consequence, the battery with a CoPc@GO-PP separator exhibits good cycling stability with a low-capacity decay rate of 0.076% per cycle at 1 C over 400 cycles and a high specific capacity of 919 mA h g –1 after 250 cycles at 0.5 C.