Frequency-dependent P-wave anisotropy due to scattering in rocks with aligned fractures

Frequency-dependent P-wave anisotropy due to scattering often occurs in fractured formations, whereas the corresponding theoretical study is lacking. Hence, based on a newly developed P-wave scattering model, we have studied the frequency-dependent P-wave scattering anisotropy in rocks with aligned fractures. To describe P-wave scattering anisotropy, we develop the corresponding anisotropy parameters similar to those for elastic anisotropy. Our results indicate that the P-wave velocity anisotropy parameters ε and δ do not change with frequency monotonically, which is different from that caused by wave-induced fluid flow. Fluid saturation in fractures can greatly decrease the P-wave velocity anisotropy, whose effects depend on the ratio of the fluid bulk modulus to the fracture aspect ratio. The P-wave exhibits elliptical anisotropy for the dry fracture case at low frequencies, but anelliptical anisotropy for the case with fluid-filled fractures. The P-wave attenuation anisotropy parameters εQ and δQ vanish in the low- and high-frequency limits but reach their maxima at the characteristic frequency when the P-wavelength is close to the fracture length. The influence of fluid on the P-wave attenuation anisotropy is similar to that on the velocity anisotropy. To further analyze frequency-dependent P-wave scattering anisotropy, theoretical predictions are compared with experimental results, which indicate reasonable agreement between them.