A 1-V 13-mW Single-Path Frequency-Translating Δ Σ Modulator With 55-dB SNDR and 4-MHz Bandwidth at 225 MHz

This paper presents a frequency-translating bandpass ΔΣ modulator that uses single-path mixing within the ΔΣ feedback loop to downconvert a 4-MHz signal band from IF1= 225 MHz at the input to IF2= 25 MHz at the output. The proposed ΔΣ modulator is designed with a sixth-order continuous-time loop filter and a 3-bit quantizer. The quantizer operates at a sampling frequency of 100 MHz, which is lower than IF1and, therefore, reduces both the power consumption and the sensitivity to timing errors relative to a conventional bandpass ΔΣ modulator. Furthermore, the loop filter implements noise shaping primarily at IF2, which reduces the sensitivity to coefficient variations. The prototype chip was fabricated in 65-nm CMOS with an active area of 0.55 mm2. It achieves an SNDR of 55 dB over a 4-MHz signal bandwidth, and consumes 13 mW from a 1-V power supply.