Answers are grounded in this paper and cite their sources.
The aim of the present research was to investigate the possibility to design contact surfaces with reduced friction using surface roughness and topography analysis. For this purpose, different 100Cr6 plate samples with different surface topography were prepared. Using different grades and combinations of grinding and polishing samples with similar Ra values, but different Rku and Rsk values were prepared.To evaluate influence of roughness parameters on friction and wear, dry and lubricated pin-on-disc tests were carried out under different contact conditions. Test results show that surfaces with high Rku andnegative Rsk values results in reduced friction.To investigate the effect of surface topography on surface roughness parameters and consequently on friction, real roughness profiles were virtually altered to achieve virtually textured surfaces. Using NIST SMATS softgauge for calculation of surface roughness parameters, virtually altered roughness profiles were investigated in terms of texture size, shape and spacing, and their influence on surface roughness parameters, especially on skewness and kurtosis. Lower diameter, higher spacing and wedge-shaped dimples were found to reflect in higher Rku and more negative Rsk parameters, which should leadto lower friction.
No takes yet. Share an insight, caveat, or question.
Sedlaček et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: