⌘+K

Pulse Explore Communities Researchers Journals

Home Communities Explore

December 1, 2014Archives of Metallurgy and MaterialsOpen Access

Fatigue Tests and Metallographic of Explosively Cladded Steel-Titanium Bimetal/ Badania Zmęczeniowe I Metalograficzne Bimetalu Stal-Tytan Zgrzewanego Wybuchowo

Andrzej Kurek Marcin Wachowski Adam Niesłony Tomasz Płociński Krzysztof J. Kurzydłowski

View Full Paper

Ask AI

Bookmark

Share

Abstract

The paper contains a description of fatigue life tests of titan-steel bimetal. The study involved specimens made of bimetal which was a combination of S355J2 steel and SB G1 265 titanium, which was imposed in the material by explosive cladding method. The research shows that the fatigue life of specimens made of native material, derived from cladded plate is less than the life of specimens of titanium-steel bimetal

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Kurek et al. (2014) studied this question.

synapsesocial.com/papers/6ab7880ce98445160f24c6a5 https://doi.org/10.2478/amm-2014-0265

View Full Paper

Ask AI

Bookmark

Share

Keep reading

Synapse has enriched 5 related papers. Consider them for comparative context:

1Investigation of the Microstructure and Selected Properties of Laser Treatment of HVOF Thermal Sprayed Coatings onto Magnesium Alloy SubstrateArchives of Metallurgy and Materials · Tue,
2Synthesis of Brookite Titanium Dioxide Nanorods using Salt-Assisted Ultrasonic Spray Pyrolysis Process and their Photocatalytic ActivitiesArchives of Metallurgy and Materials · Tue,
3Encapsulation of Ti Powders with WC-Co using High-Energy Ball Milling: Influence of Milling Time on MicrostructureArchives of Metallurgy and Materials · Tue,
4Microstructure and Mechanical Properties of Layered Aluminum Alloy Sheets Fabricated by Multi-Stack ARB ProcessArchives of Metallurgy and Materials · Tue,
5Fabricating Metal Powder Filters with Material Extrusion Additive ManufacturingArchives of Metallurgy and Materials · Tue,

More from Archives of Metallurgy and Materials

Phase Stability and Inverse Hall-Petch Effect of Severely Deformed and Annealed CrMnFeCoNi High-Entropy AlloyTue,
Effect of KOH Concentration on Microstructure Property of Biochar from Coconut Shell by Low-Temperature PyrolysisTue,
Study on the Precipitation Sequence in Al-Zn-Mg with Low Zn/Mg Aged at 200°CTue,
Influence of the Creep on Microstructure and Mechanical Properties of SiC/SiC CompositesTue,
Reverse-Patterning Process of Ti3C2Tx MXene using an Inkjet Printing TechniqueTue,